5005
Two-barrel carburetor manifold to Holley adapter
Parts list.
1 ACE Billet carburetor adapter.
4 Allen head bolts and washers.
4 Allen carburetor studs.
4 Flanged nuts
1 ACE Holley base gasket.
1 ACE Adapter to manifold gasket.
Installation;
* Remove old carburetor and stock adapter plate.
* Insert rag into manifold opening.
* Clean off old gasket material.
* Install carburetor studs in to new adapter. Torque to 16-24 lb-ft.
* Studs may be installed point up if desired, use two nuts locked together to torque.
* Remove rag.
* Using new gasket (with red dot up) install adaptor
    with ACE logo pointing away from valve cover.
* Use the allen head bolts with washers to secure new adapter. Torque to 14-21 lb-ft.
* Install carburetor gasket and carburetor.
* Install washer head nuts. Torque to 11- 18 lb-ft.
* Install linkage and fuel line.
* Start engine and set idle.
To check for leaks, spray water between adapter and manifold.
© Automotive Component Engineering 2009/12
12/4/2011
Return to Instructions index